Ford introduced the Ranchero, a vehicle classified as a coupe utility, at the New York Auto Show on December 8, 1956. Though this was a new vehicle for the American market, some 22 years earlier Ford of Australia designer, Lew Bandt penned the first coupe utility in 1934. This was in response to Australian ranchers, who desired a vehicle that was rugged enough to haul livestock during the week and sufficiently elegant to go to church with the spouse on Sunday. This coupe utility became known as a ute in Australia. With a production run of 82 years (1934-2016), the ute was a smashing success down under. Read on as we take a look back at Ford Ranchero history from 1957 through 1979.

Each classic car is an expression of its owner's taste and personality. Some choose to restore their vehicles to factory condition, with every last nut and bolt put back to the way it was when the vehicle left the assembly line. Others prefer to incorporate some slight modifications, such as a new set of wheels, coilover suspension, or a disc brake conversion. A few choose to diverge from tradition with major mods that speak to their independent attitude. Guy Moore, the owner of this 1955 Ford F-100, falls into the third category. That's why he decided to drop a Chevy LS1 under the hood of his Ford truck.

Patina, which can be defined as "change of a surface through age and exposure," is a polarizing subject in the classic car restoration world. Some people feel that it's a sign of a worn-out exterior that desperately needs new sheetmetal and a fresh coat of paint, while others see it as a badge of honor earned through decades of hard use. Those who fall into the latter camp often go to great lengths to preserve the cosmetic patina, and wouldn't dream of covering it up. Ruben Garcia's 1970 C10 is a nice example of this eye-catching build style.

At first glance, Rick Scott's '54 Chevy truck looks a bit rough. The cab was transplanted from an earlier split-windshield pickup. Its sheetmetal is sprayed in a mottled coat of flat black paint, the grille is dented, and both the front bumper and tailgate are missing completely. But when you take a closer look at this truck, you'll start spotting some subtle (and not-so-subtle) hints that it was built with a singular purpose: speed. Rick turned his truck into an all-out drag-racing machine.

Every project vehicle has a beginning and, as the saying goes, Rome wasn't built in a day. Although we see plenty of complete builds with every last nut and bolt replaced, we also see quite a few in-progress builds, and we find these equally interesting. A partially-completed project tells a story about the journey it has been on as well as the intended destination.

Here at Classic Industries, we love providing restoration parts for vintage Chevy cars and trucks, but we also recognize that those vehicles aren't just designed to sit in a garage collecting dust. They're designed to be driven, and in many cases, driven fast.

Last week on The Parking Lot, we featured a beautiful 1969 Chevy C10 owned by Darin Smith of local restoration and performance shop DWS Classics. That truck was rescued from the desert and painstakingly rebuilt from the ground up. This week, we have another one of DWS Classics' creations: a 1964 GMC shortbed.

Like Darin's other truck, this GMC was found baking in the desert sun, and was purchased to undergo a full restoration. Fortunately, due to the low moisture of its surroundings, the truck stayed mostly rust-free. Darin stripped it down to the bare frame, and began a frame-off build.

In more ways than one, this Chevy C10 isn't what it seems. Glancing at the front end, you'll see cues that indicate it might be a 1967 or '68 model: the lower-profile hood, "Chevrolet" lettering, and grille style all match these earlier model years. The lack of side markers on the fenders and bedsides would make seem to indicate a '67 model, but the cab's large rear window says it's at least a '68 model, since 1967 trucks had a small rear window.

The owner of this truck — Darin Smith, of Huntington Beach, California — tells us it's actually a 1969 Chevy C10. Darin found the truck out in the California desert, and rebuilt it with a mixture of parts to achieve the look he wanted. He liked the appearance of the '68 front end, so he purchased a replacement hood, grille, and emblems for that model year. The fenders and bedsides bear no side markers, because he liked that clean appearance only found on the '67 trucks.

It’s every car enthusiast’s dream to participate in a barnfind. We fantasize about discovering a rare, original, and highly sought-after classic car that had been stowed away in a barn, garage, or yard for decades, preserved like a time capsule from the past. Unfortunately, the reality is that these barnfinds are still old cars. They've been sitting in the same spot without use or maintenance, often for decades. So, if you come across one of these vehicles, how should you examine, repair, and restore it?

Be it your ’57 Bel Air, or Hemi Road Runner, classic vehicles have become more than just mere transportation…they’re investments. While car insurance is protection for your transportation—trying to get a standard run-of-the-mill insurance company to protect your “investment” can be problematic, at best.  As some would say in the medical field: You need a specialist.

Classic Industries Understands Collector Car Enthusiasts

Classic Industries understands the needs of enthusiasts, and are experts in filling the gap when there’s a need for high-quality parts and accessories. So, when it comes to insurance for your classic car, who better to understand the issues associated with classic car insurance, than Classic Industries? Using their vast experience, they have developed the Classic Industries Collector Car Insurance Program.